EAB Engineering AS

Virksomhet
Utvikling, prosjektering og leveranse av utstyr til systemer
for undervanns olje og gass utvinning.
Verktøy for undervannsoperasjoner.
Utstyr for installasjon og fjerning.
Utstyr for undervanns inntrekking og oppkobling.
Permanente moduler for terminering og avgrening av
undervannsledninger.
Moduler for subsea pigging.

Activity
Your partner in Subsea engineering and tie-in technology.
-
EAB is your specialist on Subsea tie-in and infrastructure
from wellhead to point of export.
-
EAB delivers
Equipment for installation and commissioning.
Subsea intervention and tie-in tooling.
Subsea connection systems.
Subsea tie-in structures like PLEM?s, TEE?s, Riser Bases,
Manifolds and UTA?s.
FEED studies and Subsea engineering in general.
-
Our solutions are based on standard products and
executions, or are tailor made to customer requirements.
-
EAB has advanced engineering resources specialised
on Subsea engineering, a network of experienced
sub-suppliers and access to extensive test facilities.
-
EAB is member of the Framo Engineering Group.
-
PULL-IN AND CONNECTION
EAB has participated in the development of Subsea
connection systems since 1990.
-
EAB has to various degrees contributed to many of the well
known systems available on the Subsea market covering a
range from 3? to 30? pipe connections.
-
All this experience is built into the latest generation of EAB
Spool Connection System.
-
EAB Spool Connection System enables diver-less tie-in and
connection of a wide range of sizes without use of heavy or
advanced tooling. All tools needed are launched in a separate
tool basket and picked up and carried by the manipulator of
an ROV.
-
The system is used to connect rigid and flexible spools,
risers and umbilical terminations and can be arranged for
vertical or horizontal orientation of the hubs.
-
With EAB Spool Connection System Subsea operations
can be prepared for and executed with a minimum of
specialised operators and a small spread.
-
Subsea Tooling.
-
EAB hub intervention tools cover the following operations.
-
Cleaning and inspection.
Seal and cap handling and replacement.
-
Tools are supplied for a large number of hub types and
configurations, single bore and multi-bore. The tools are
carried separately by ROV or integrated in more complex
tooling, even up to what we characterise as robot tools.
-
The core design is common, but the various applications
are adapted to the actual hub and tool configuration.
-
One important feature with EAB Hub intervention tools is
that the same tool can be used on a large size range, and
are adjusted without surfacing.
-
EAB Standard Torque tools cover the range Class 4 to 7
according to ISO 13628-8 and can be delivered with
electronic monitoring of number of revolutions made and
torque applied.
-
Running tools and other special tools for diver-less
installation, retrieval, intervention and operation is our
speciality.
-
INSTALLATION EQUIPMENT.
-
EAB pipe and spool Installation equipment is tailored to the
various Termination heads on the market. This family of
tools works individually or together attached to the
Termination heads of rigid or flexible flowlines, spools and
risers.
-
The FLT Flowline lifting tool is used in one or both ends during
launching of pipe- or flexible lines under tension. The FLT is
also used to pick up lines that have to be retrieved.
-
The EAB Subsea Pig Launchers and Receivers are used
under commissioning and pressure testing after installation.
-
The EAB Temporary ROV operable clamp is available for the
most common hub profiles. The clamp is used for pressure
caps or fitting the EAB Pig Trap to the actual Termination head.
The clamp has high capacity to take installation forces and
internal pressure.
-
These products are now standardised based on years of
experience and feedback from the users.
-
EAB Softlanding cylinders are water based and offer 100%
response to hook motions and need no external connections.
A large capacity range of standard cylinders is available.
-
PERMANENT EQUIPMENT - STRUCTURES.
-
EAB provides on EPC basis all typical structures used in the
Subsea pipe infrastructure like.
-
PLET and PLEM?s.
TEE?s.
Riser Bases.
Pigging Stations.
Manifolds.
-
Our reference list covers a large number of PLET and PLEM?s
equipped with tie-in equipment from all the major system
suppliers as well as EAB own connection system, and with
connection of all pipe or spool sizes from 6? to 30?.
-
These are structures both for in-line installation, and larger
units that require separate installation.
-
EAB has extensive experience in the design and supply of
dropped object and trawl protection structures.