Aichele Werkzeuge GmbH

Member for+ 6 years

Last update:

Contact - Aichele Werkzeuge GmbH

Zur Flügelau 40
74564 Crailsheim

Germany

Fax +49 7951 295555

Send a message - Aichele Werkzeuge GmbH

*Mandatory fields

Legal information - Aichele Werkzeuge GmbH

Nature Head Office
Year established 1939
Legal form Gesellschaft mit beschränkter Haftung
Describe your Company and attract Business opportunities (NAC08) (5154)
Corporate capital 60,000 EUR
Handelsregister HRB 670723 mit Sitz in Ulm
VAT no DE211522151
No employees 35 Employees
Kompass ID? DE604665
Kompass member for + 6 years
Membership Booster International

Presentation - Aichele Werkzeuge GmbH

Over 75 Years Of Experience....A carbide-tool manufacturing – The decades-long experience makes us the technological powerhouse of ideas for the most diverse areas of application.



Diamond and carbide the materials for our high-quality precision tools. Appreciation we bring, but first and foremost to our clients and employees. We focus on quality. And just because we know that our tools move a lot, we reflect on our roots. We are proud of the support of our stable family-owned company and every employee is motivated engine to success. So, we were able to become a recognized specialist for cutting, milling and drilling tools and are nowadays a Synonym for precision.Areas of application and Systems specialists for mechanical engineering, we develop effective and individual solutions for you – from the rotary cutting unit for existing production lines to complete cutting solutions with feeding and discharge of the material, including the drive and control system. In order to bring their cost-effectiveness in the future at full speed, before the competitors.You make our solutions in the areas of Hygiene, Nonwovens / nonwovens, paper and foil to your driving force.Our markets are:hygiene industry-sanitary napkins panty liners wing tie openings, baby diapers, training PantsEinlagenInkontinenzprodukteerwachsenenwindelnwattepadsfeuchttüchermedizintechnikpflasterwundauflagenpatientenumhängetupferdentalprodukteverpackungstechnik / other perforation / AufreißlaschenKaffeefilterTeebeutelverschlüssebriefhüllenbackpapierpommespapieretikettentortenbödenwaschhandschuhestaubsaugerbeutelverschlüsseteststreifenfalls you previously had to rely on isolated solutions, we develop like full concepts of special tools, coatings, rotary cutting tools or extensive equipment. And, of course, we can also advise you on the adjacent periphery of the actuator, recording, and materials, as well as to the optimal use of the tools. That's how professionals work. And you know it. We know that.https://www.aichele.de/de/services/consulting.htmlConsulting / consulting support training project management and excellent service, our setting is always the best work.In the case of our clients, we are valued partners. If you have not yet had to do with us – you can expect us to provide this Service:maintenance, wait more than the usual re - Sharpening and exchange service! We maintain your products, and also optimize documented after completion of the purchase the Use of your tools, and improved on the Basis of our ISO 9001 certification.Regrinding services for rotary cutting tools with our modern machine Park we can guarantee a consistent Quality stay also when regrinding of the cutting and counter - cutting rolls.This Service and quality, we also offer for any and all third-party products.Manufacturing technologies:grinding, cylindrical grinding: roller, segments, rings, etc. in the Inner and outer diameter up to max. ø 850 x 2000 mm long in the form of grinding: roller, segment flat grinding: rods, discs, knives, etc turn in all materials, max. Diameter: 660 x 2000 mm long all materials, max milling. Dimensions:length 1500 mm, width 700 mm, height 550 mmHochfrequenzlötenMaterialien: steel, hard metal, PCD and CBNMetallspritzenMax. Workpiece dimensions diameter 500 x cut 1500 mmDrahterodierenFunkenerosives wire EDM start hole drilling in the Aichele-wire erosion center with 4 to 5 axis controls to edit cut plates, shapes, and electrodes in full-automatic mode.The result of extraordinarily wide application, meeting all the highest standards coordinate routes: 350 x 500 mm, cutting height: up to 300 mmZusätzliche starting holes can be set with an EDM drill holes in nearly all electrically conductive materials (hardness not relevant)diameter: 0.4 - 2.2 mm, drill depth ratio: diameter / depth = 1 / 100AntihaftbeschichtungenDie anti-adhesive coating can be applied to anywhere, where sticky materials (e.g. hot-processed glue, adhesive, etc.) and for the bonding of machine components may result.Be differences in the coatings due to their heat resistance (180 °C or 260 °C), as well as by the surface roughness and wear resistance.Teflon coating temperature resistant up to max. 260 °CNeuartige fluoro-plastic coating made of a mixture of various fluoropolymers with MetalleinlagerungenIm comparison to conventional PTFE coatings, improved anti-adhesive properties at a high temperature range (max. = 260 °C, continuous; max. = 290 °C, intermittently)Very high surface tension leads to pronounced anti-adhesion character of the coating, open back htungnur a few substances adhere to Plasmacoat 4050, adhesive materials can easily be physio remove harmless, meets the current regulations of the Federal health Department shows the best values for a total layer thickness of 20-25 µmNiedriger coefficient of friction (Ra. 1-3), with Optional additional anti-wear protection for longer service life silicone coating, wear-resistant, nonstick coating, temperature resistant up to max. 180 °CPhysiologisch safe, meets all the current regulations of the Federal health office uniform surface roughness Ra 10-14 µmSehr good entrainment properties shows the best values for a total layer thickness of 100-150 µmQualitätWir appreciate the direct and cooperative collaboration with our customers. So we always know exactly what you need and where we can improve. This philosophy, we are connected. For you, this means: market-driven products for high requirements, in a timely manner in consistent quality!Hard metal tools and diamond tools, high wear-resistant components made of HSS, HM, oxide ceramics, silicon carbide, Boron carbide, boron nitride and diamond, a service for the form cutting tools, radio cut EDM-based wire and start hole drilling, rotational mould cutting machine of the series ROTAcut, equipped with high wear-resistant form of the cutting cylinder and the counter cutting cylinder made of HSS and high performance carbide for a wide variety of application field of anti-stick coating \"PLASMACOAT\" for the components of the adhesive manufacturing industry.Development, production and contract manufacturing of tools for the tire industry, paper industry and plastics, shear knives for the disposal of nuclear waste. Magnetic cylinders and embossing cylinders, design and manufacture of custom cutting systems, complete with control and drive precision parts, oxide ceramics, tungsten carbide tools, diamond tools, magnetic cylinders

Company’s Videos -  Aichele Werkzeuge GmbH

General Information -  Aichele Werkzeuge GmbH

Certifications

Type: ISO 9001:2000

Banks

Kreissparkasse, Crailsheim

Volksbank, Crailsheim

Export area

West. Europe, North America, Asia-Pacific

Brands -  Aichele Werkzeuge GmbH

ROTAcut 

PLASMACOAT 

Contact people - Aichele Werkzeuge GmbH Download the executives list

Herr Wilhelm Aichele

CEO - Chief Executive Officer (Geschäftsführung)

Herr Matthias Aichele

CEO - Chief Executive Officer (Geschäftsführung)

Herr Andreas Hanselmann

Information Systems Director/Manager (EDV-Leitung)

Location -  Aichele Werkzeuge GmbH

Other addresses

Visit address Zur Flügelau 40 Postfach 1106 74564 Crailsheim Germany
Postal address Postfach 1106 74551 Crailsheim Germany

Opening hours -  Aichele Werkzeuge GmbH

Thursday
Open
8:00 AM - 5:00 PM
Monday
Open
8:00 AM - 5:00 PM
Tuesday
Open
8:00 AM - 5:00 PM
Wednesday
Open
8:00 AM - 5:00 PM
Friday
Open
8:00 AM - 5:00 PM
Saturday
Closed
Sunday
Closed

Key figures -  Aichele Werkzeuge GmbH

Turnover

Activities -  Aichele Werkzeuge GmbH

Producer Distributor Service provider

Other classifications (for some countries)

NACE Rev.2 (EU 2008) : (5154)

Activities